Products
Ten tool groups covering the four main operations and work on Swiss-type lathes. Each group has its own page with the model range, grades and coatings.
Milling
Nine series by application: alloy and hardened steel up to 70 HRC, stainless, heat-resistant alloys, aluminium and graphite, high-feed, modular, barrel and ball nose.
Go to section →
Bodies for 90° shoulder, face and high-feed milling, copy milling and dedicated series for aluminium. Seventeen insert grades.
Go to section →Drilling and holes
Seven series for specific jobs — from general-purpose drilling to hardened steel, flat bottom and centre drilling. Depths from 3D to 50D.
Go to section →
Ø12.5–60 mm, depth 2D–5D. The insert wears out, not the tool: the body lasts for years.
Go to section →
Straight and helical flute, versions with internal coolant supply. Ø2.99–20 mm, H7 fit in a single pass.
Go to section →Turning
External turning and boring. Four insert clamping systems: high-rigidity top clamp, lever, wedge clamp and screw.
Go to section →
42 chipbreaker geometries for negative and positive inserts, 16 grades from cermet and CVD to PCD and CBN, eight coating technologies.
Go to section →
External, internal and face grooving toolholders, parting blades with block holders, inserts 1.5–6 mm wide in six grades.
Go to section →Threading and Swiss-type lathes
ME and KE toolholders for external threads, MI and KI boring bars for internal threads. Full-profile ISO 6g/6H and 60° partial-profile inserts.
Go to section →
Quick-change toolholders for sliding headstock lathes: AMDX 12×12 and 16×16 base, turning and threading heads, internal coolant supply.
Go to section →